HP Coil Cleaner - gallon

HP CLEANER is an evaporator coil cleaner that quickly dissolves built-up dirt, grease, nicotine, lint, and more. Meets USDA standards. Recommended for evaporator coils. When used on condenser coils and electronic air filters, rinsing is recommended. Dilute with 3 to 6 parts water, depending on the application. Also available in a super-concentrated quart that can ship without hazmat fees! VOC content is zero.

Features and Benefits

Heavy Duty
Non-Acid
Penetrates Deep
Dissolves Grease, Lint, Dirt, and Nicotine

HP Cleaner Directions:

Wear gloves and eye protection.

Turn the system off.
Mix 1 part HP Cleaner with 3 to 6 parts water.
Spray directly on the coil, make sure to thoroughly saturate the coil.
Allow the solution to sit for 5 minutes.
Resume normal operations.

Evaporator Coils: Apply to the air intake side of the coil. If possible, the fan should be operating. No rinsing needed.

Condenser Coils: Rinse thoroughly after applying.

Electronic Air Filters: Turn off unit and fan. Be sure to wet all areas of the plate. Rinsing is recommended. Keep from freezing.