RHCLP 7.5ton Commercial Air Handler HP Only 460V 3phase

The pre-painted, sheet metal cabinet uses 18 ga material for structural components with an underlying coat of G60 electro deposition powder-coating that is tested to withstand a rigorous 500 hr salt spray test, per ASTM B117

Inherently protected motors are mounted inside of insulated cabinet to reduce motor noise

A choice of motor horsepower's and drive combinations are available to allow you to meet specified CFM at various static pressures up to 2 in external static pressure

Allows for horizontal installation in most standard drop ceiling applications and the movement of units through most standard doorways for addition or replacement work

1 in throwaway filters are standard, but filter racks are designed to accept either 1 in or 2 in filters

Two circuit, interlaced row split coils are constructed with copper tubes and aluminum fins mechanically bonded to the tubes for maximum heat transfer capabilities

All coil assemblies are leak tested up to 450 psig internal pressure prior to installation into units

Field piping connections are made through a fixed post between two side access panels on either side of the unit

Allows flexibility to meet most field conditions as well as full accessibility after the installation is complete, units may be used with two straight cool condensing units or single circuit manifolded in the field using the copper fittings shipped with each unit

Provides two-stage airflow for improved part load efficiency

The galvanized steel drain pan is designed to trap condensate in either vertical or horizontal installations

Condensate drain connections are located on both sides of the unit allowing complete flexibility to meet most field conditions

Two removable panels on top and each side of the unit are easily removed for access to motors, blowers, sheaves and filters

All Models are designed for either application and can be installed in either position as supplied from the factory

It has two TX valves with internal check valves that allow reverse flow to occur, providing superior control during heating and cooling cycles

The RHCLP air handler has been rated and certified to operate with matching size RPCL heat pumps