RHPAYB 2ton Residential Classic Package Heat Pump R454B
Price only visible to logged in users
Product number:100701
Manufacturer number:RHPAYB024AJT101NA
Other models available
General Information
- Coil Rating
- 3.9 sq-ft Face Area, 1-Row
- Drive Type
- Direct
- HP Rating
- 1/3 hp
- Number Of Stages
- 1
- Rotational Speed
- 825 rpm
- Type
- RHPAYB
- Product Group
- Package Classic HP
Additional Info
Air Volume/Air Flow
Application
Coils
Compressor
Connections
Description
Electrical
Energy Efficiency/Performance
Filters
Logistical Information
Rated Capacity
Refrigerant
Sound Power/Pressure
Product description
Scroll Compressors on all Models: Provides maximum efficiency and quiet operation
MicroChannel Evaporator and Condenser Coil: Delivers superior performance with a robust surface, a decreased refrigerant requirement and is lighter than conventional copper tube/aluminum fin coils. All-aluminum construction offers superior protection against formicary corrosion and aluminum tube rubbing damage. The design allows for easier and faster cleaning
Two Thermal Expansion Valves: Standard on all models for precise superheat control, reliability, and energy efficiency at all operating conditions
High and Low Pressure Control: Standard on all models for refrigerant component protection and reliability
Filter drier: Standard on all models
100% factory run tested
PlusOne® Refrigerant Detection System™: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation - if excess refrigerant is detected
Rugged Base Rail: Contributes to improved installation and handling
Easily Accessible Control Box and Slide-Out Blower Section: Allows for faster installability and serviceability
Side and Down Discharge Options Available: All models are shipped ready for horizontal applications but can be adjusted depending on installation requirements
Double Sloped Evaporator Coil Drain Pan: Allows for complete water removal from the unit-contributing to improved indoor air quality
Louvered Condenser Compartment: Protects the coil against yard hazards and/or weather extremes
Supply and Return Air Openings: Feature a one-inch-tall flange to prevent water migration into the ductwork
Supplemental Electric Heating Option Available: Factory and field installed, electrical heat strips, up to 15 kW with simplified single-point wiring, are available for periods of extreme weather conditions
Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%1 lower GWP than previous-generation refrigerants with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
MicroChannel Evaporator and Condenser Coil: Delivers superior performance with a robust surface, a decreased refrigerant requirement and is lighter than conventional copper tube/aluminum fin coils. All-aluminum construction offers superior protection against formicary corrosion and aluminum tube rubbing damage. The design allows for easier and faster cleaning
Two Thermal Expansion Valves: Standard on all models for precise superheat control, reliability, and energy efficiency at all operating conditions
High and Low Pressure Control: Standard on all models for refrigerant component protection and reliability
Filter drier: Standard on all models
100% factory run tested
PlusOne® Refrigerant Detection System™: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation - if excess refrigerant is detected
Rugged Base Rail: Contributes to improved installation and handling
Easily Accessible Control Box and Slide-Out Blower Section: Allows for faster installability and serviceability
Side and Down Discharge Options Available: All models are shipped ready for horizontal applications but can be adjusted depending on installation requirements
Double Sloped Evaporator Coil Drain Pan: Allows for complete water removal from the unit-contributing to improved indoor air quality
Louvered Condenser Compartment: Protects the coil against yard hazards and/or weather extremes
Supply and Return Air Openings: Feature a one-inch-tall flange to prevent water migration into the ductwork
Supplemental Electric Heating Option Available: Factory and field installed, electrical heat strips, up to 15 kW with simplified single-point wiring, are available for periods of extreme weather conditions
Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%1 lower GWP than previous-generation refrigerants with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
General Information
- Coil Rating
- 3.9 sq-ft Face Area, 1-Row
- Drive Type
- Direct
- HP Rating
- 1/3 hp
- Number Of Stages
- 1
- Rotational Speed
- 825 rpm
- Type
- RHPAYB
- Product Group
- Package Classic HP
Additional Info
Air Volume/Air Flow
Application
Coils
Compressor
Connections
Description
Electrical
Energy Efficiency/Performance
Filters
Logistical Information
Rated Capacity
Refrigerant
Sound Power/Pressure
Product description
Scroll Compressors on all Models: Provides maximum efficiency and quiet operation
MicroChannel Evaporator and Condenser Coil: Delivers superior performance with a robust surface, a decreased refrigerant requirement and is lighter than conventional copper tube/aluminum fin coils. All-aluminum construction offers superior protection against formicary corrosion and aluminum tube rubbing damage. The design allows for easier and faster cleaning
Two Thermal Expansion Valves: Standard on all models for precise superheat control, reliability, and energy efficiency at all operating conditions
High and Low Pressure Control: Standard on all models for refrigerant component protection and reliability
Filter drier: Standard on all models
100% factory run tested
PlusOne® Refrigerant Detection System™: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation - if excess refrigerant is detected
Rugged Base Rail: Contributes to improved installation and handling
Easily Accessible Control Box and Slide-Out Blower Section: Allows for faster installability and serviceability
Side and Down Discharge Options Available: All models are shipped ready for horizontal applications but can be adjusted depending on installation requirements
Double Sloped Evaporator Coil Drain Pan: Allows for complete water removal from the unit-contributing to improved indoor air quality
Louvered Condenser Compartment: Protects the coil against yard hazards and/or weather extremes
Supply and Return Air Openings: Feature a one-inch-tall flange to prevent water migration into the ductwork
Supplemental Electric Heating Option Available: Factory and field installed, electrical heat strips, up to 15 kW with simplified single-point wiring, are available for periods of extreme weather conditions
Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%1 lower GWP than previous-generation refrigerants with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
MicroChannel Evaporator and Condenser Coil: Delivers superior performance with a robust surface, a decreased refrigerant requirement and is lighter than conventional copper tube/aluminum fin coils. All-aluminum construction offers superior protection against formicary corrosion and aluminum tube rubbing damage. The design allows for easier and faster cleaning
Two Thermal Expansion Valves: Standard on all models for precise superheat control, reliability, and energy efficiency at all operating conditions
High and Low Pressure Control: Standard on all models for refrigerant component protection and reliability
Filter drier: Standard on all models
100% factory run tested
PlusOne® Refrigerant Detection System™: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation - if excess refrigerant is detected
Rugged Base Rail: Contributes to improved installation and handling
Easily Accessible Control Box and Slide-Out Blower Section: Allows for faster installability and serviceability
Side and Down Discharge Options Available: All models are shipped ready for horizontal applications but can be adjusted depending on installation requirements
Double Sloped Evaporator Coil Drain Pan: Allows for complete water removal from the unit-contributing to improved indoor air quality
Louvered Condenser Compartment: Protects the coil against yard hazards and/or weather extremes
Supply and Return Air Openings: Feature a one-inch-tall flange to prevent water migration into the ductwork
Supplemental Electric Heating Option Available: Factory and field installed, electrical heat strips, up to 15 kW with simplified single-point wiring, are available for periods of extreme weather conditions
Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%1 lower GWP than previous-generation refrigerants with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort