Universal Intermittent Furnace Control

Price only visible to logged in users
Product number:11145
Manufacturer number:S9200U1000/U
Other models available
General Information
- For Use With
- Honeywell VR8205 Direct Ignition Combination Gas Controls
- Pre-Purge Time
- 30s
- Product Group
- Other Heating Parts
Application
Description
Electrical
Humidity
Temperature
Time
Product description
Flame Failure Response Time (sec): 2 Seconds max @ 1µA
Line Voltage: 120 Vac (97-132 Vac)
Low Voltage: 24V (18-30 Vac)
Igniter Current: 5 A resistive @ 120VAC
Thermostat Anticipator Setting: (Stage 1 only) 100mA
HSI Warmup Time: 17/27 or 30/30 seconds
Trial For Ignition: 4, 6, or 8 seconds
Interpurge: 60 seconds
Ignition Trials:Three, two retries if flame is not sensed
Number of LEDs: 3
Gas Control Used With: Any 24Vac redundant, direct ignition gas control rated at 1.5A or less. Honeywell VR8205 recommended.
Cooling Contactor Used With: Any 24Vac contactor rated at 1.0A or less
Induced Draft Blower Load: 2.2FLA / 25LRA max @120Vac
Ciculator Load: 14.5FLA / 25LRA max @120Vac
Type of Fan Used With: Standard Induction-Type Circulating Fan
Overview
Universal Integrated Furnace Control offers universal compatibility and diagnostics. It replaces a large number of furnace control models in single-stage warm air furnaces. Uses 120Vac hot surface igniter. Includes instructions and special wire harnesses for easy replacement.
Features
• Cross reference and wire harnesses provided for simple replacement over 195 existing furnace controls.
• Main burner ignition using a 120V hot surface igniter.
• Flame rectification circuit to monitor flame presence.
• Monitoring of system pressure switch, high temperature limit, and rollout functions.
• Appliance operation/safety requirements controlled via microprocessor.
• Controls circulating fan motor based on appliance requirements, in response to a conventional low voltage thermostat.
• LED system status, performance and diagnostic indication.
• Twinning capability
Line Voltage: 120 Vac (97-132 Vac)
Low Voltage: 24V (18-30 Vac)
Igniter Current: 5 A resistive @ 120VAC
Thermostat Anticipator Setting: (Stage 1 only) 100mA
HSI Warmup Time: 17/27 or 30/30 seconds
Trial For Ignition: 4, 6, or 8 seconds
Interpurge: 60 seconds
Ignition Trials:Three, two retries if flame is not sensed
Number of LEDs: 3
Gas Control Used With: Any 24Vac redundant, direct ignition gas control rated at 1.5A or less. Honeywell VR8205 recommended.
Cooling Contactor Used With: Any 24Vac contactor rated at 1.0A or less
Induced Draft Blower Load: 2.2FLA / 25LRA max @120Vac
Ciculator Load: 14.5FLA / 25LRA max @120Vac
Type of Fan Used With: Standard Induction-Type Circulating Fan
Overview
Universal Integrated Furnace Control offers universal compatibility and diagnostics. It replaces a large number of furnace control models in single-stage warm air furnaces. Uses 120Vac hot surface igniter. Includes instructions and special wire harnesses for easy replacement.
Features
• Cross reference and wire harnesses provided for simple replacement over 195 existing furnace controls.
• Main burner ignition using a 120V hot surface igniter.
• Flame rectification circuit to monitor flame presence.
• Monitoring of system pressure switch, high temperature limit, and rollout functions.
• Appliance operation/safety requirements controlled via microprocessor.
• Controls circulating fan motor based on appliance requirements, in response to a conventional low voltage thermostat.
• LED system status, performance and diagnostic indication.
• Twinning capability
Product
Product ID
Stock
Quantity
List price
Discount
Net price
General Information
- For Use With
- Honeywell VR8205 Direct Ignition Combination Gas Controls
- Pre-Purge Time
- 30s
- Product Group
- Other Heating Parts
Application
Description
Electrical
Humidity
Temperature
Time
Product description
Flame Failure Response Time (sec): 2 Seconds max @ 1µA
Line Voltage: 120 Vac (97-132 Vac)
Low Voltage: 24V (18-30 Vac)
Igniter Current: 5 A resistive @ 120VAC
Thermostat Anticipator Setting: (Stage 1 only) 100mA
HSI Warmup Time: 17/27 or 30/30 seconds
Trial For Ignition: 4, 6, or 8 seconds
Interpurge: 60 seconds
Ignition Trials:Three, two retries if flame is not sensed
Number of LEDs: 3
Gas Control Used With: Any 24Vac redundant, direct ignition gas control rated at 1.5A or less. Honeywell VR8205 recommended.
Cooling Contactor Used With: Any 24Vac contactor rated at 1.0A or less
Induced Draft Blower Load: 2.2FLA / 25LRA max @120Vac
Ciculator Load: 14.5FLA / 25LRA max @120Vac
Type of Fan Used With: Standard Induction-Type Circulating Fan
Overview
Universal Integrated Furnace Control offers universal compatibility and diagnostics. It replaces a large number of furnace control models in single-stage warm air furnaces. Uses 120Vac hot surface igniter. Includes instructions and special wire harnesses for easy replacement.
Features
• Cross reference and wire harnesses provided for simple replacement over 195 existing furnace controls.
• Main burner ignition using a 120V hot surface igniter.
• Flame rectification circuit to monitor flame presence.
• Monitoring of system pressure switch, high temperature limit, and rollout functions.
• Appliance operation/safety requirements controlled via microprocessor.
• Controls circulating fan motor based on appliance requirements, in response to a conventional low voltage thermostat.
• LED system status, performance and diagnostic indication.
• Twinning capability
Line Voltage: 120 Vac (97-132 Vac)
Low Voltage: 24V (18-30 Vac)
Igniter Current: 5 A resistive @ 120VAC
Thermostat Anticipator Setting: (Stage 1 only) 100mA
HSI Warmup Time: 17/27 or 30/30 seconds
Trial For Ignition: 4, 6, or 8 seconds
Interpurge: 60 seconds
Ignition Trials:Three, two retries if flame is not sensed
Number of LEDs: 3
Gas Control Used With: Any 24Vac redundant, direct ignition gas control rated at 1.5A or less. Honeywell VR8205 recommended.
Cooling Contactor Used With: Any 24Vac contactor rated at 1.0A or less
Induced Draft Blower Load: 2.2FLA / 25LRA max @120Vac
Ciculator Load: 14.5FLA / 25LRA max @120Vac
Type of Fan Used With: Standard Induction-Type Circulating Fan
Overview
Universal Integrated Furnace Control offers universal compatibility and diagnostics. It replaces a large number of furnace control models in single-stage warm air furnaces. Uses 120Vac hot surface igniter. Includes instructions and special wire harnesses for easy replacement.
Features
• Cross reference and wire harnesses provided for simple replacement over 195 existing furnace controls.
• Main burner ignition using a 120V hot surface igniter.
• Flame rectification circuit to monitor flame presence.
• Monitoring of system pressure switch, high temperature limit, and rollout functions.
• Appliance operation/safety requirements controlled via microprocessor.
• Controls circulating fan motor based on appliance requirements, in response to a conventional low voltage thermostat.
• LED system status, performance and diagnostic indication.
• Twinning capability
Product
Product ID
Stock
Quantity
List price
Discount
Net price
